
COILOVER KIT SPORT VOLKSWAGEN SCIROCCO III
By MTS Technik
NZD$1,646.45
- SKU:
- MTSGWVW36-S
- Width:
- 100.00 (cm)
- Height:
- 40.00 (cm)
- Depth:
- 40.00 (cm)
Save Extra 35% Off on First Order
Coilover Kit Volkswagen Scirocco III
Coilover Kit MTS Technik for Volkswagen Scirocco III, lowering both axles between 25 - 50 mm. Dedicated for the years of: 05/08 - 11/17, for the engine version: 1.4TSI / 2.0TSI / 2.0R / 2.0TDI .








CAR:
Make |
Volkswagen
|
Model |
Scirocco III
|
Type |
137/138
|
Engine |
1.4TSI / 2.0TSI / 2.0R / 2.0TDI
|
Year |
05/08 - 11/17
|
TECH SPECS:
Series: | sport |
![]() |
-1090 kg
|
![]() |
-880 kg
|
Lowering FA: |
25 - 50 mm
|
Lowering RA: |
25 - 50 mm
|
Camber / top mount FA: |
no
|
Camber / top mount RA: |
no
|
Coilover Main Spring (Front): |
Spring rate (34 - 40 - 70 N/mm)
|
Coilover Main Spring (Rear): |
Spring rate (80 N/mm)
|
Coilover Helper Spring (Rear): |
Spring rate (20 N/mm)
|
Info: |
multilink rear suspension
|
TUV Certificate: |
yes
|
Download instruction: | Download instruction |
Download installation manual: | Download installation manual |
Download TUV Certificate: | Download TUV Certificate |
PRODUCT NOTES
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
7 - If the vehicle is equipped with the AMR System (Audi Magnetic Ride) - the system has to be deactivated. Suitable drivers are available only on request!
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
25 - In some cases it might be necessary to dismount the rear adjustment to achieve the maximum lowering.
35 - Rear thread adjustment block is mounted on the top.
52 - Only suitable for multilink suspension.
73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.