COILOVER KIT STREET VOLKSWAGEN SCIROCCO III - With Camber plates
COILOVER KIT STREET VOLKSWAGEN SCIROCCO III - With Camber plates
COILOVER KIT STREET VOLKSWAGEN SCIROCCO III - With Camber plates
COILOVER KIT STREET VOLKSWAGEN SCIROCCO III - With Camber plates
COILOVER KIT STREET VOLKSWAGEN SCIROCCO III - With Camber plates
COILOVER KIT STREET VOLKSWAGEN SCIROCCO III - With Camber plates

COILOVER KIT STREET VOLKSWAGEN SCIROCCO III - With Camber plates

By MTS Technik

No reviews yet Write a Review
$1,900.00
SKU:
MTSGWVW94
Width:
95.00 (cm)
Height:
40.00 (cm)
Depth:
40.00 (cm)

Save Extra 35% Off on First Order

Details
Quantity:

In Stock
Adding to cart… The item has been added

Make It A Bundle

Coilover Kit Volkswagen Scirocco III

Coilover Kit MTS Technik for Volkswagen Scirocco III, lowering both axles between 25 - 50 mm. Dedicated for the years of: 05/08 - 11/17, for the engine version: 1.4TSI / 2.0TSI / 2.0R / 2.0TDI .

2 years warranty 2 year warranty with no mileage limit to confirm high quality.
High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Top mounts with camber adjustment The camber plates allow the wheel angle adjustment and increase the precision of driving.
hexaCOIL adjustable spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Anti-corrosion protection yellow galvanized Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.
 
CAR:
Make
Volkswagen
Model
Scirocco III
Type
137/138
Engine
1.4TSI / 2.0TSI / 2.0R / 2.0TDI
Year
05/08 - 11/17
TECH SPECS:
Series: street
Max. Axle Load FA:
-1090 kg
Max. Axle Load RA:
-880 kg
Lowering FA:
25 - 50 mm
Lowering RA:
25 - 50 mm
Camber / top mount FA:
yes
Camber / top mount RA:
no
Coilover Main Spring (Front):
Spring rate (32 N/mm)
Coilover Main Spring (Rear):
Spring rate (27 - 40 - 45 N/mm)
Info:
multilink rear suspension
TUV Certificate:
no
Download instruction: Download instruction
Download installation manual: Download installation manual
 
PRODUCT NOTES
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
7 - If the vehicle is equipped with the AMR System (Audi Magnetic Ride) - the system has to be deactivated. Suitable drivers are available only on request!
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
25 - In some cases it might be necessary to dismount the rear adjustment to achieve the maximum lowering.
35 - Rear thread adjustment block is mounted on the top.
52 - Only suitable for multilink suspension.
73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
 

Adjustable camber / caster plates (front) Volkswagen Scirocco III

Adjustable camber / caster plates (front) MTS Technik for Volkswagen Scirocco III allows you to adjust the angle of inclination of the wheels relative to the ground and the lead angle of the kingpin.

Evolution 2 - the latest generation of MTS Technik top mounts.

When designing the new, improved upper mounts, we were inspired by the slogan 'Daily stance - basic motorsport'. We wanted the product to have sports features (increased stiffness, new uniball bearing, angle adjustment) while minimizing the nuisance in everyday use and high aesthetics required by showcar event cars (aesthetic black-gold).

2 years warranty 2 year warranty with no mileage limit to confirm high quality.
High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Top mounts with camber adjustment The camber plates allow the wheel angle adjustment and increase the precision of driving.

Compatibility

Compatible with the following MTS Technik coilover suspensions:

MTSGWVW36
MTSGWVW36-S

If you want to use Adjustable camber / caster plate (front) in a coilover suspension of another brand, check the dimensions below:

A - Piston rod diameter: 22 mm
B - Piston rod thread pitch: M14x1.5
C - Length of the groove: 30 mm
D - Piston rod thread length: 30 mm
Dimensions Camber plates
CAR:
Make
Volkswagen
Model
Scirocco III
Type
137/138
Engine
1.4 / 2.0 / 2.0 R / 2.0 TDI
Year
05/08 - 11/17
TECH SPECS:
Axle:
front
Version:
Adjustable camber / caster plate
Adjustment range:
-2.5° to +0.5° [eng]
Additional lowering:
-
Weight:
800 g
Fitting for OEM suspension:
yes
TUV Certificate:
no
 
PRODUCT NOTES
59 - If the kit does not include a special piston rod nut, use a nut from the shock absorber.
63 - The adjustment range may be different depending on the vehicle version, the lowering or the accuracy of welding of the suspension components.

Related Products

Spring Collection 2022

COILOVER KIT STREET VOLKSWAGEN SCIROCCO III COILOVER KIT STREET VOLKSWAGEN SCIROCCO III
Add to Cart The item has been added

MTS Technik

COILOVER KIT STREET VOLKSWAGEN SCIROCCO III

Coilover Kit Volkswagen Scirocco III Coilover Kit MTS Technik for Volkswagen Scirocco III, lowering both axles between 25 - 50 mm. Dedicated for the years of: 05/08 - 11/17, for the engine...

$1,490.00
!