
MTS Technik - COILOVER KIT STREET BMW 3 SERIES / E90 SEDAN
By MTS Technik
NZD$1,381.25
- SKU:
- MTSE90STREET
- Width:
- 42.00 (cm)
- Height:
- 20.00 (cm)
- Depth:
- 62.00 (cm)
Save Extra 35% Off on First Order
Coilover Kit BMW 3 Series / E90 Sedan
Coilover Kit MTS Technik for BMW 3 Series / E90 Sedan, lowering the front axle between 20 - 55 mm, and rear between 30 - 65 mm. Dedicated for the years of: 02/04 - 02/12, for the engine version: 316i / 318i / 320i / 320si / 323i / 325i / 330i / 335i / 316d / 318d / 320d / 325d / 330d / 335d.

High quality confirmed by a 2-year warranty without a mileage limit.

Suspension components characterized by increased corrosion resistance and made of the highest quality materials.

The use of twin-tube technology guarantees stable shock absorber performance.

Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.

Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.

Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.

Adjustable Shock Absorbers protected by a double layer of gold zinc and adjustments made of anodized aluminum guaranteeing increased corrosion resistance.

Coilover springs made by Eibach, the world leader in the sport springs industry.
CAR:
Make |
BMW
|
Model |
3 Series / E90 Sedan
|
Type |
E90
|
Engine |
316i / 318i / 320i / 320si / 323i / 325i / 330i / 335i / 316d / 318d / 320d / 325d / 330d / 335d
|
Year |
02/04 - 02/12
|
TECH SPECS:
Series: | street |
![]() |
1090 kg
|
![]() |
1135 kg
|
Lowering FA: |
20 - 55 mm
|
Lowering RA: |
30 - 65 mm
|
TUV Certificate: |
yes
|
Download instruction: | Download instruction |
Download installation manual: | Download installation manual |
Download TUV Certificate: | Download TUV Certificate |
PRODUCT NOTES
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
8 - Not for 4x4.
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
32 - In some cases additional OE-parts for the installation of the suspension components are required. Those are not included in the set.
33 - Including M-Technik.